Введение в продукт
| Processing Properties | |
| Cold Working | Good |
| Cutting (Machining) | Not Suitable |
| Electroplating | Good |
| Hot-Dip PlatingGood | Good |
| Laser Welding | Fair |
| Resistance Welding | Fair |
| Soft Soldering | Good |
| Physical Properties | |
| Density | 8.88 g/cm³ |
| Electrical Conductivity @20℃ | 64 %IACS |
| Electrical Conductivity @20℃ (Alternative Expression) | 37 MS/m |
| Thermal Conductivity @20℃ | 253 W/(m·K) |
| Specific Heat | 0.385 J/(g·K) |
| Elastic Modulus | 130 GPa |
| Poisson's Ratio | 0.33 |
| Coefficient of Thermal Expansion | 17.6 × 10⁻⁶ /K |
Application Scope
- Signal connector: Suitable
- Power connector: Suitable
- Miniaturized connector: Suitable
- Switch/relay: Suitable
- Semiconductor: Not recommended
It is highly suitable for USB Type-C, especially for vapor chamber (VC), relay springs, etc.
Packaging
The outer diameter of the standard roll can reach 1300mm. The weight of horizontally multi-connected rolls in a barrel can reach 500kg, and multi-connected rolls can reach 3 tons.
Specifications
- Strip thickness: 0.08 - 3.0mm, provided as per customer requirements.
- Minimum strip width: 8.5mm.
- Electroplated strips and hot-dip plated strips are available.
Fatigue Strength
Fatigue strength is defined as the maximum bending stress that a material can withstand without fracture under 10,000,000 cycles of loading, and it is related to the state of the selected material. Under normal circumstances, the fatigue strength is approximately 1/3 of the tensile strength. For fine-grained solid-solution alloys, the fatigue strength can be increased to 1/2 of the tensile strength.